Flat Metro Large Brick Tile White
Flat Metro Large Brick Tile White
This quantity will cover: XX meters squared
The Reco Metro Large Brick combines the time and money-saving advantages of a panel with the high-gloss, brick-like style of a traditional large tile. Available in a range of colours. Ideal for kitchens and bathrooms. How to fit offset tiles
| Tile colour | White |
|---|---|
| Tile size | 300mm x 100mm |
| Panel depth | |
| Finish | Gloss |
| Surface | Scratch resistant |
| Coating | Chemical resistant |
| Coating | UV resistant |
| Protection | 100% waterproof |
| Cleaning | Easy clean / Mould resistant |
Technical specification documents:
PVC Technical specification pdf Acrylic Technical specification pdf
Sample Pack - The Best Sellers
FAQs
For more FAQs visit our dedicated page on this site.
As the panels have no grout you do not need waterproof matting or boards behind the panels. You can also fit them over existing tiles which saves you strip out costs. You need only three products to fit our panels (Reco seal tape, adhesive & silicone) vs up to twelve for tiles. Then when fitting our panels, it takes around 1/4 of the time which means there are labour savings. Once installed the panels do not require maintenance so there are also further long term savings. The combination of these attributes mean that we are at least 40% cheaper than basic tiles and up to 80% cheaper than high end or bespoke tiles.
Reco Tile, Reco Design, Reco Protect, Reco Glass EFX and Reco Gloss can all be fitted behind a hob as long as they are at least 80-100mm from the back of the burner. If it is a gas hob then we recommend a piece of toughened glass over the hob area to protect the panel from flames. For a commercial or trade installation we recommend using only PVC or Reco Glass SFX (flame) panels. Acrylic panels class 3, PVC and Reco Glass SFX (flame) Class 1.
The panels have been designed to fit over existing tiles, or into tight spaces, without sacrificing from the room. The 2-4mm thickness of the panels means they are easy to cut and flexible, which enables them to be fitted in small or tight areas.
All gloss panels are coated with an acrylic capping (the same as a bath) which makes them very scratch resistant. Any small scratches can be polished out. The satin finish panels are covered with a PVC protective coating that is anti-scratch & anti-graffiti. We do not however, recommend abrasive cleaning or the use of harsh chemicals on our panels as they are unnecessary.
No - the panels can not be used on floors due to the slip rating and panel composition/structure.
We offer a 10 year manufacturers warranty.
No. When you attach the panels to the wall you flatten them against the wall to ensure good contact all over (just like wallpaper). This method, plus the adhesive means the panels become solid. If you tap them they sound like tiles. Most people cannot tell they are plastic until they touch the wall and realise it is warm and not cold.
About Reco Surfaces
With manufacturing and head office in Boston, Lincolnshire and offices in Central London we are a manufacturer, supplying an innovative range of modern tiling and wall covering solutions globally.
